<![CDATA[Ignitions]]> http://www.precisionraceengines.com/ignitions Sun, 05 Sep 2010 16:08:11 +0000 Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[8 pack Blue Spark Plug Wire Fire Boot Protector]]> http://www.precisionraceengines.com/ignitions/8-pack-blue-spark-plug-wire-fire-boot-protector.html New Engine Works #16204 Fire Boot 8 pack.The cure to spark plug wire failure in high heat environments,the fire boot will withstand up to 1200 degrees F.Universal size and shape fits most boots,even 90 degree.Made in USA

Price:$39.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Ford Racing 9mm Spark Plug Wire Set Ford 302, 351W w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/ford-racing-9mm-spark-plug-wire-set-ford-302-351w-w-hei-cap.html These 9mm wires feature a spiral-wound suppression core for low resistance and minimum spark loss. They have tough silicone insulation to withstand high temperatures and voltage loss for minimum crossfire, and are highly resistant to fuels, oils, and solvents. Other features include 45 degree plug boots (most applications), stainless steel distributor cap terminals, and a coil wire (if applicable). The wires are numbered for each cylinder and have the "Ford Racing" script on them.

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Super Conductor Red Spark Plug Wire Set Small Block Chevy w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/msd-super-conductor-red-spark-plug-wire-set-small-block-chevy-w-hei-cap.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$99.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Black Super Conductor Spark Plug Wire Set Small Block Chevy w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/msd-black-super-conductor-spark-plug-wire-set-small-block-chevy-w-hei-cap.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$99.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Blue Heli-Core 8mm Spark Plug Wire Set GM/Chevy SBC HEI CAP]]> http://www.precisionraceengines.com/ignitions/msd-blue-heli-core-8mm-spark-plug-wire-set-gm-chevy-sbc-hei-cap.html The MSD Heli-Core Ignition Wires are perfect for passenger cars, tow vehicles and performance cars. The wires are 8mm and can be relied on to deliver all the high voltage your engine needs! Heli-Core wires feature a stainless steel conductor that is wound around a special glass core. The stainless conductor provides a low resistance path for high voltage to flow while keeping Electro Magnetic Interference (EMI) to a minimum. By winding the conductor around a special glass inner core, the EMI is suppressed inside the wire where it cannot interfere with other electronic devices on your vehicle. Heli-Core Wires also prevent a phenomenon known as Inductive crossfire. When two wires are routed close to each other and happen to follow the firing order of the engine, the spark from one wire could be induced into the other wire. This would cause the other cylinder to ignite far advanced and will cause detonation. MSD Spark Plug Wires prevent inductive crossfire with our special winding procedure and center core material. The EMI and voltage is held within the wire and is transferred only to the plug!

Price:$89.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Super Conductor Red Spark Plug Wire Set Ford 351C or 460 w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/msd-heli-core-red-spark-plug-wire-set-ford-351w-or-460-w-hei-cap.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$104.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Blue Heli-Core 8mm Spark Plug Wire Set Ford 351C or 460 w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/msd-heli-core-spark-plug-wire-set-ford-351w-or-460-w-hei-cap.html The MSD Heli-Core Ignition Wires are perfect for passenger cars, tow vehicles and performance cars. The wires are 8mm and can be relied on to deliver all the high voltage your engine needs! Heli-Core wires feature a stainless steel conductor that is wound around a special glass core. The stainless conductor provides a low resistance path for high voltage to flow while keeping Electro Magnetic Interference (EMI) to a minimum. By winding the conductor around a special glass inner core, the EMI is suppressed inside the wire where it cannot interfere with other electronic devices on your vehicle. Heli-Core Wires also prevent a phenomenon known as Inductive crossfire. When two wires are routed close to each other and happen to follow the firing order of the engine, the spark from one wire could be induced into the other wire. This would cause the other cylinder to ignite far advanced and will cause detonation. MSD Spark Plug Wires prevent inductive crossfire with our special winding procedure and center core material. The EMI and voltage is held within the wire and is transferred only to the plug!

Price:$89.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[8 pack Black Spark Plug Wire Fire Boot Protector]]> http://www.precisionraceengines.com/ignitions/8-pack-black-spark-plug-wire-fire-boot-protector.html New Engine Works Fire Boot 8 pack.The cure to spark plug wire failure in high heat environments,the fire boot will withstand up to 1200 degrees F.Universal size and shape fits most boots,even 90 degree.Made in USA

Price:$39.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[8 pack RED Spark Plug Wire Fire Boot Protector]]> http://www.precisionraceengines.com/ignitions/8-pack-red-spark-plug-wire-fire-boot-protector.html New Engine Works Fire Boot 8 pack.The cure to spark plug wire failure in high heat environments,the fire boot will withstand up to 1200 degrees F.Universal size and shape fits most boots,even 90 degree.Made in USA

Price:$39.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[8 pack Silver Spark Plug Wire Fire Boot Protector]]> http://www.precisionraceengines.com/ignitions/8-pack-silver-spark-plug-wire-fire-boot-protector.html New Engine Works #16203 Fire Boot 8 pack.The cure to spark plug wire failure in high heat environments,the fire boot will withstand up to 1200 degrees F.Universal size and shape fits most boots,even 90 degree.Made in USA

Price:$39.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Adjustable Timing Control for Igniton Boxes]]> http://www.precisionraceengines.com/ignitions/msd-3000-3800-rpm-moduel-pills-6.html change your vehicle's ignition timing without leaving the driver's seat with one of these MSD adjustable timing controls. They're designed to fit virtually all vehicles with a 12 V negative-ground ignition, a distributor, and an externally mounted coil. They feature a knob that mounts to the dash for easy and accurate timing adjustments, allowing you to adjust timing up to 15 degrees to compensate for bad gas, altitude changes, and heavy loads.

Price:$156.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 8000-8800 RPM Module Pills]]> http://www.precisionraceengines.com/ignitions/msd-3000-3800-rpm-moduel-pills-5.html Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. Kits includes five modules in 200 rpm increments.

Price:$33.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 7000-7800 RPM Module Pills]]> http://www.precisionraceengines.com/ignitions/msd-3000-3800-rpm-moduel-pills-4.html Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. Kits includes five modules in 200 rpm increments.

Price:$33.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 6000-6800 RPM Module Pills]]> http://www.precisionraceengines.com/ignitions/msd-3000-3800-rpm-moduel-pills-3.html Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. Kits includes five modules in 200 rpm increments.

Price:$33.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 5000-5800 RPM Module Pills]]> http://www.precisionraceengines.com/ignitions/msd-3000-3800-rpm-moduel-pills-2.html Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. Kits includes five modules in 200 rpm increments.

Price:$33.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 4000-4800 RPM Module Pills]]> http://www.precisionraceengines.com/ignitions/msd-3000-3800-rpm-moduel-pills-1.html Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. Kits includes five modules in 200 rpm increments.

Price:$33.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 3000-3800 RPM Module Pills]]> http://www.precisionraceengines.com/ignitions/msd-3000-3800-rpm-moduel-pills.html Tune your rpm-activated MSD control to your application with one of these MSD rpm module kits. Kits includes five modules in 200 rpm increments.

Price:$33.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works Two Step RPM Rev Limiter Switch]]> http://www.precisionraceengines.com/ignitions/engine-works-two-step-rpm-rev-limiter-switch.html Allows you to select two different RPM limits to be activated at different times.Can be used anywhere standard RPM pills are used.Pills not included.Made in USA

Price:$61.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 6A Ignition Box #6200]]> http://www.precisionraceengines.com/ignitions/msd-ignition-box-7503.html Whether you have a powerful street machine, hard working truck, or trick Street Rod, the multiple sparks of the MSD 6A CD ignitions will ensure complete combustion. Bolt one on and look for quicker ETs, easier starting, reduced plug fouling, more power, and increased fuel economy. They'll work with virtually any 4, 6, or 8-cylinder vehicle with a distributor, as long as it has a 12-18 V electrical system. They can be triggered by breaker points, magnetic pickup, or the output of an electronic amplifier

Price:$194.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 8202 Blaster 2 Ignition Coil]]> http://www.precisionraceengines.com/ignitions/msd-8202-blaster-2-ignition-coil.html MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.

Price:$48.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Ford 289-302 Small Diameter Pro Billet Distributor ]]> http://www.precisionraceengines.com/ignitions/msd-8579-pro-billet-distributor.html MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that is machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

Price:$289.66

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 10-Plus Ignition Box #7502 ]]> http://www.precisionraceengines.com/ignitions/msd-ignition-box-7502.html With these MSD-10 Plus ignitions, you can get the best of the race-proven 10 ignitions, plus a few upgrades. They give you the best spark characteristics of both magnetos (inductive ignitions) and capacitive discharge ignitions, all in one powerful fuel-burning package. Instead of using two separate coils like the 10 ignitions, the MSD-10 Plus ignitions produce multiple CD/inductive sparks by using their patented Stacker ignition technology in one incredible coil to do the work of two. In conjunction with this available coil, the MSD 10-Plus ignitions deliver the fast, initial high voltage required to ionize the plug gap and sustain the sparks, with a high current, long duration spark. They are capable of long duration sparks that last for 20-30 degrees of crankshaft rotation. This unique combination of ignition styles ensures complete combustion of any fuel mixture, under extreme pressures, at any race rpm. To top it all off, they feature a built-in, two-step module selector to provide two adjustable rev limiters.

Price:$889.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 8252 Blaster HVC Ignition Coil]]> http://www.precisionraceengines.com/ignitions/msd-8252-blaster-hvc-ignition-coil.html The Blaster HVC is designed for high RPM,long duration applications such as road course & circle track racing using an MSD 6 series ignition.

Price:$139.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD #8207 Blaster SS Coil ]]> http://www.precisionraceengines.com/ignitions/msd-8207-blaster-ss-coil.html When used with an MSD 6 Series ignition, these MSD Blaster SS coils delivered 300 milliamps and 40,000 V of spark. The coils feature efficient E-core windings, brass terminals, and a durable Rynite housing.

Price:$52.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works 8.5 Plug Wires Set GM HEI cap,over valve cover]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-gm-hei-over-valve-cover.html New Engine Works Megafire #16420 8.5mm Spark Plug Wire GM V8 HEI over valve cover for Chevrolet 302DZ 305 327 350 383 stroker 400 small blocks.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature *Stainless Mag Spiral Wound Conductor *Super Low 250 ohm per ft resistance *Kevlar center core *Thick EPDM Insulation layer *Fiberglass Braid Reinforcment *8.5 Silicone Outer Jacket heat rated to 575 degrees F *Pure Silicone Heavy Duty Boots Available in RED,BLUE,or BLACK

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works 8.5 Plug Wires Set Ford 5.0 Mustang F-150]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-ford-5-0-mustang-f-151.html New Engine Works Megafire #16430 8.5mm Spark Plug Wire Ford Mustang 5.0 1984-1993, F-150 5.0 302 1987-1993 or 5.8 351W 1988-1998.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature Stainless Mag Spiral Wound Conductor Super Low 250 ohm per ft resistance Kevlar center core Thick EPDM Insulation layer Fiberglass Braid Reinforcment 8.5 Silicone Outer Jacket heat rated to 575 degrees F Pure Silicone Heavy Duty Boots

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Chrysler 383-400 MSD 8545 Pro Billet Distributor ]]> http://www.precisionraceengines.com/ignitions/msd-8545-pro-billet-distributor-chrysler-383-400.html MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that is machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

Price:$299.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Ford 289 302 MSD 8582 Pro Billet Distributor ]]> http://www.precisionraceengines.com/ignitions/msd-8582-pro-billet-distributor-ford-289-302.html NEW MSD #8582 Pro Billet Distributor Ford 289 302.MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that is machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the 0.500 in. shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD’‘s accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied.

Price:$258.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Ford 351C 460 MSD 8580 Pro Billet Distributor ]]> http://www.precisionraceengines.com/ignitions/msd-8580-pro-billet-distributor-ford-351c-460.html NEW MSD #8580 Pro Billet Distributor Ford 351C 460.MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that is machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the 0.500 in. shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD’‘s accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied.

Price:$258.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Ford 289 302 Mallory HEI Pro Billet Distributor ]]> http://www.precisionraceengines.com/ignitions/msd-8366-pro-billet-distributor-chevy-efi-350-454.html These new 85 Series HEI distributors from Mallory feature a CNC-machined cast 356 T-6 aluminum upper housing with a billet lower housing for lightweight durability. They include Mallory's new mechanical advance mechanism and adjustable vacuum advance and come with a red cap and rotor with brass inserts. They're direct plug-in replacements with OE factory-type harness connectors (Chevrolet versions only) and are available with or without Mallory's high performance coil. You can also get them in a Race Prepped version that features a locked-out mechanical advance, a locked-out vacuum advance with the chamber removed, and a complete advance weight and spring kit to allow for mechanical advance conversion. These new 85 Series HEI distributors also come with a steel distributor gear to work with a roller cam motor.

Price:$189.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 8261 Balster HVC-2 Coil for 7 series Ignitions]]> http://www.precisionraceengines.com/ignitions/msd-8261-balster-hvc-2-coil-for-7-series-ignitions.html NEW MSD #8261 Blaster HVC-2 Coil. MSD engineers drew upon their experience with Top Fuel cars and created these new HVC-2 coils for use with the MSD 7 Series Ignition Controls. These coils utilize an iron U-Core design with a segmented bobbin for improved voltage distribution. The bobbin is molded from Dupont Rynite FR946 and wound specifically to create an effective coil with incredible voltage capabilities, lightning quick rise time, and lengthy spark duration. The housing, also molded from Rynite material, features far-spaced brass primary terminals and a well-protected secondary tower for increased spark isolation. The housing is completely potted with an epoxy compound for vibration resistance and installs with sturdy vibration mounts. They're designed for use with MSD 7 Series ignitions.

Price:$207.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD 8223 Blaster 3 Ignition Coil]]> http://www.precisionraceengines.com/ignitions/msd-8223-blaster-3-ignition-coil.html MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.Takes MAle/HEI coil wire.

Price:$52.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works Megafire 60,000 Ignition Coil]]> http://www.precisionraceengines.com/ignitions/engine-works-megafire-60-000-ignition-coil.html New Engine Works Megafire #16559 Red Canister Oil Filled 60,000 volt Coil.Higher voltage output by this coil results in more complete fuel burn,especially in high RPM applications.Offers 25,000 more volts than stock.Oil filled for cooler operation.Made in USA!

Price:$43.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works Megafire Chrome 60,000 Ignition Coil]]> http://www.precisionraceengines.com/ignitions/engine-works-megafire-chrome-60-000-ignition-coil.html New Engine Works Megafire #16560 Chrome Canister Oil Filled 60,000 volt Coil.Higher voltage output by this coil results in more complete fuel burn,especially in high RPM applications.Offers 25,000 more volts than stock.Oil filled for cooler operation.Made in USA.

Price:$43.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Chevy V8 MSD Pro Billet Distributor Locked-Out w/ bronze gear]]> http://www.precisionraceengines.com/ignitions/new-msd-85501-pro-billet-distributor-locked-chevy-v8.html New MSD #85501 Pro Billet Distributor Locked Out for Chevrolet 302DZ 305 327 350 383 stroker 400 small blocks or 396 402 427 454 502 big block. This strong, billet aluminum distributor is set up for engines that run locked-out timing or an MSD Timing Computer. With no advance assembly, the rotor plate is welded directly to the oversized shaft. A sealed ball bearing guides the top of the shaft while an extra long sintered bushing stabilizes the lower portion. This extra support ensures stable and accurate timing signals throughout your engine's entire rpm range. Trigger signals are produced via a high output magnetic pickup. This pickup is extremely accurate and never requires adjustment. A precision manufactured reluctor is responsible for triggering the pickup. Since this distributor is designed primarily for race engines, an oversized (+.006") bronze gear is installed along with an adjustable slip collar for modified blocks, heads or intake manifolds. NOTE: Must be used with an MSD 6, 7, 8 or 10 Series Ignition. Supplied with a Cap and Rotor.

Price:$299.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Chevy V8 350 454 MSD Pro Billet Distributor]]> http://www.precisionraceengines.com/ignitions/msd-85551-pro-billet-distributor-chevy-v8-350-454.html New MSD #85551 Pro Billet Distributor for Chevy Chevrolet 302DZ 305 327 350 383 stroker 400 small block and 396 402 427 454 502 big block. MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that is machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the 0.500 in. shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD’‘s accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. Require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.

Price:$259.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works Universal 8.5 Plug Wires Set 90° boot]]> http://www.precisionraceengines.com/ignitions/engine-works-universal-8-5-plug-wires-set-90-boot.html New Engine Works Megafire #16402 Universal set with 90 degree spark plug boot for HEI and non-HEI.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature Stainless Mag Spiral Wound Conductor Super Low 250 ohm per ft resistance Kevlar center core Thick EPDM Insulation layer Fiberglass Braid Reinforcment 8.5 Silicone Outer Jacket heat rated to 575 degrees F Pure Silicone Heavy Duty Boots

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works 8.5 Plug Wires Set Ford 5.0 Mustang F-150]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-ford-5-0-mustang-f-150.html New Engine Works Megafire #16432 8.5mm Spark Plug Wire Ford Mustang 5.0 1994-1995, Couger 1991-1993,Thuderbird 1991-1993,F-150 Lighting 351W 1993-1995,F-150 5.0 1994-1996.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature Stainless Mag Spiral Wound Conductor Super Low 250 ohm per ft resistance Kevlar center core Thick EPDM Insulation layer Fiberglass Braid Reinforcment 8.5 Silicone Outer Jacket heat rated to 575 degrees F Pure Silicone Heavy Duty Boots

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works 8.5 Plug Wires Set 89-93 GM 5.0 5.7]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-89-93-gm-5-0-5-7.html New Engine Works Megafire #16424 8.5mm Spark Plug Wire GM V8 5.0 305 & 5.7 350 1989-1993 Camaro Impala or Caprice.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature Stainless Mag Spiral Wound Conductor Super Low 250 ohm per ft resistance Kevlar center core Thick EPDM Insulation layer Fiberglass Braid Reinforcment 8.5 Silicone Outer Jacket heat rated to 575 degrees F Pure Silicone Heavy Duty Boots

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works 8.5 Plug Wires Set BBC socket cap]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-gm-hei-bbc-under-v-c-1.html New Engine Works Megafire #16427 8.5mm Spark Plug Wire GM V8 point socket cap for Chevrolet 396 402 427 454 502 big block.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature *Stainless Mag Spiral Wound Conductor *Super Low 250 ohm per ft resistance *Kevlar center core *Thick EPDM Insulation layer *Fiberglass Braid Reinforcment *8.5 Silicone Outer Jacket heat rated to 575 degrees F *Pure Silicone Heavy Duty Boots Avaliable in RED,BLUE,or BLACK

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works 8.5 Plug Wires Set GM HEI BBC]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-gm-hei-bbc-under-v-c.html New Engine Works Megafire #16425 8.5mm Spark Plug Wire GM V8 HEI cap over valve cover for Chevrolet 396 402 427 454 502 big block.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature *Stainless Mag Spiral Wound Conductor *Super Low 250 ohm per ft resistance *Kevlar center core *Thick EPDM Insulation layer *Fiberglass Braid Reinforcment *8.5 Silicone Outer Jacket heat rated to 575 degrees F *Pure Silicone Heavy Duty Boots Avaliable in RED,BLUE,or BLACK

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works SBC 8.5 Plug Wires Set socket cap under ex]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-socket-cap-sbc-over-v-c-1.html New Engine Works Megafire #16423 8.5mm Spark Plug Wire GM points socket cap under exhaust for Chevrolet 302DZ 305 327 350 383 stroker 400 small blocks.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature Stainless Mag Spiral Wound Conductor Super Low 250 ohm per ft resistance Kevlar center core Thick EPDM Insulation layer Fiberglass Braid Reinforcment 8.5 Silicone Outer Jacket heat rated to 575 degrees F Pure Silicone Heavy Duty Boots

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works 8.5 Plug Wires Set socket cap SBC over v/c]]> http://www.precisionraceengines.com/ignitions/engine-works-8-5-plug-wires-set-socket-cap-sbc-over-v-c.html New Engine Works Megafire #16422 8.5mm Spark Plug Wire GM points socket cap over valve cover for Chevrolet 302DZ 305 327 350 383 stroker 400 small blocks.Made in USA these wires are ideally suited for performance street cars and trucks as well as race applications.The secret to this wire is its 250 ohm per foot spiral mag core.The engineers have created an ignition wire with incredible low resistance that suppresses EMI extremely well.EMI resistance provides nois suppression protecting onboard electronics,radio communicationand FM radio reception. These wires feature *Stainless Mag Spiral Wound Conductor *Super Low 250 ohm per ft resistance *Kevlar center core *Thick EPDM Insulation layer *Fiberglass Braid Reinforcment *8.5 Silicone Outer Jacket heat rated to 575 degrees F *Pure Silicone Heavy Duty Boots Avaliable in RED,BLUE,or BLACK

Price:$59.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[Engine Works Megafire 50,000 Ignition Coil]]> http://www.precisionraceengines.com/ignitions/engine-works-megafire-50-000-ignition-coil.html New Engine Works Megafire #16552 Red Canister Oil Filled 50,000 volt Coil.Higher voltage output by this coil results in more complete fuel burn,especially in high RPM applications.Offers 15,000 more volts than stock.Oil filled for cooler operation.Made in USA.

Price:$38.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Black Super Conductor Spark Plug Wire Set Ford 351C or 460 w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/msd-black-super-conductor-spark-plug-wire-set-ford-351c-or-460-w-hei-cap.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$107.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Blue Heli-Core 8mm Spark Plug Wire Set GM/Chevy BBC HEI CAP]]> http://www.precisionraceengines.com/ignitions/msd-blue-heli-core-8mm-spark-plug-wire-set-gm-chevy-bbc-hei-cap.html The MSD Heli-Core Ignition Wires are perfect for passenger cars, tow vehicles and performance cars. The wires are 8mm and can be relied on to deliver all the high voltage your engine needs! Heli-Core wires feature a stainless steel conductor that is wound around a special glass core. The stainless conductor provides a low resistance path for high voltage to flow while keeping Electro Magnetic Interference (EMI) to a minimum. By winding the conductor around a special glass inner core, the EMI is suppressed inside the wire where it cannot interfere with other electronic devices on your vehicle. Heli-Core Wires also prevent a phenomenon known as Inductive crossfire. When two wires are routed close to each other and happen to follow the firing order of the engine, the spark from one wire could be induced into the other wire. This would cause the other cylinder to ignite far advanced and will cause detonation. MSD Spark Plug Wires prevent inductive crossfire with our special winding procedure and center core material. The EMI and voltage is held within the wire and is transferred only to the plug!

Price:$95.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Super Conductor Red Spark Plug Wire Set Big Block Chevy w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/msd-super-conductor-red-spark-plug-wire-set-big-block-chevy-w-hei-cap.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$95.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Black Super Conductor Spark Plug Wire Set Big Block Chevy w/HEI Cap]]> http://www.precisionraceengines.com/ignitions/msd-black-super-conductor-spark-plug-wire-set-big-block-chevy-w-hei-cap.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$95.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Super Conductor Red Spark Plug Wire Set Chry. 383-440 HEI for MSD Dist.]]> http://www.precisionraceengines.com/ignitions/msd-super-conductor-red-spark-plug-wire-set-chry-383-440-hei-for-msd-dist.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$99.99

]]> Sun, 05 Sep 2010 16:08:11 +0000 <![CDATA[MSD Black Super Conductor Spark Plug Wire Set Chry. 383-440 HEI for MSD Dist]]> http://www.precisionraceengines.com/ignitions/msd-black-super-conductor-spark-plug-wire-set-chry-383-440-hei-for-msd-dist.html The MSD 8.5mm Super Conductor Wire is "the" performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it's great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) "choke". This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Price:$99.99

]]> Sun, 05 Sep 2010 16:08:11 +0000